Monday, 11 August 2014

Tali'Zorah Cosplay: Part 2 - Painting on Swirls and Sewing the Hood!

It's not hard to imagine what a pain in the bum it would be to try and source a fabric that looked anything like Tali's. It's very unique and in many cases, not even consistent, it doesn't seem to follow a set repeat so it would be impossible to find it. Some places like spoonflower.com offer a printed version but not only is it really expensive, it's too uniform for me, so I decided that the only thing for it was to paint it on myself! This represents a lot of challenges. For one, I would need to contend with a fabric that warps and stretches a lot! (My own fault, I know!) And in a more general sense, it was going to take a shit tonne of time...but what is cosplay if not time consuming?!


So many swirls....


The Process:

Idea 1: At first, I had the not-so-brilliant idea of using a white fabric marker. This produced what can only be described as a paint-like substance, but only if you shook it 12 times and prayed to the gods of cosplay and fabric painting, old and new. It could not seem to tackle the stretchy fabric I'm using and it puckered, wouldn't write, spurted everywhere, didn't work and just generally wouldn't take to the fabric, which does seem to have a light covering of lint on it. So that idea was scrapped.

Idea 2: The next attempt involved mixing acrylic paint with a fabric medium (1:1 ratio), a technique which worked very well on my Mass Effect themed canvas shoe painting extravaganza (which if you haven't seen, you can check them out here! Mass Effect Shoes!). However, it just didn't work this time round! When painted onto a fabric like this, it just wasn't consistent or uniform in its application and ended up looking like this (a hot mess basically!):



Third time lucky right!?

Attempt 3: This is the moment where I had to accept that I likely couldn't supersede the need to buy real fabric paint, so I gave in and bought some Dylon Fabric paint (which at the time of posting this is on offer in HobbyCraft stores! 20% off!) This worked far better: it has great coverage, doesn't flake or not take and looks nice and crisp once it dries.

And so it begins....

As for the swirl pattern itself, I did make attempts to match it to the original design but in the bits I couldn't see or wasn't sure about, I just winged it and kind of made it up but kept it in line with what the design is like originally. 





Mistakes have been made... frequently... like this one where I totally forgot how to swirl....





Or this one, where I just misjudged the spacings (this has happened a lot! Like 50%+ of the swirls!)


But all in all, it hasn't gone too badly and I'm liking the progress so far! It has taken me about 2 days of pretty much solid painting to get the two hood pieces and the middle part to my liking and then it was time to sew them up!

Sewing it all up!
I did a fair bit of reading about sewing jersey fabric but in the end, what worked for me was a straight stitch with a wide-ish stitch length, that's all! I suppose ensuring I have a stretchy seam isn't that important because the hood and top part aren't form fitting.

So, off I sewed! Each hood piece needed sewing the the centre strip and then each armhole needed a quick stitch across and that's it! But once it was all stitched up, for some reason it was absolutely huge! Nothing like the size of my mockup, I think due to the stretch in the fabric and the way I'd left it handing over chairs and radiators and what not, I'd ended up making it larger than when I initially cut it, so I had to try and reduce some of the fabric bulk by sewing with larger seam allowances.

Then, I needed to sew on the U shape she has and all the trim. I chose exactly the same fabric but in a grey. I've seen some people use white and I do like the contrast but I'm pretty sure that in game, it is actually a grey/lilac/darker purple. Who the hell knows, I certainly don't, I just went with what I liked!

The way I went about making it was in short, highly inefficient but that's like my cosplay trademark! I seem to like to get stuff done in the least sensible way possible :P I'm sure 100% of you would be able to do it far easier than me! I basically did some half assed measuring of the centre piece, transferred it to a piece of tissue paper but instead of drawing  U shape and cutting that out, I left the piece  of tissue paper as it was (a long rectangle) and stuck the fabric under it and then just kind of cut into it. Trust me, it's as stupid as it sounds! But the problem with this fabric is that it slips and curls horribly. If I had my time again, I might have gone for something less stretchy! But hey ho, we're committed now!




I stitched the grey piece on with a combo of the machine and hand sewing to get round the curves and what not. And once that was done, I had the unenviable task of sewing all the trim on! I wish I'd gone for some real bias tape instead of just cutting strips of the grey fabric out and pinning it in place! It took an absolute age, about 4-5 hours to get all the grey fabric on the hood. But it is done!! Check it out:





Not everything is beautiful mind you! I've got some real shoddy bits but I plan on hiding them :P And the back is definitely too loose, but hopefully with all the buckles and back harness-y thing she has going on, I should be able to tighten it up and keep it flat and looking like it fits me properly!


So, the hood is completed! But I still have to paint swirls on the rest of it yet, although I'm going to have a little break between starting that!

Saturday, 9 August 2014

Tali'Zorah Cosplay: Part 1 - Pattern Drafting

For costumes like these where you simply can't buy a pattern off the shelves, you've got to draft it yourself! Or, in my case, you go to a charity shop, buy a hoodie that strangely enough pretty much already looks like Tali's costume....





.....And then you shamelessly sharpie all over it and hack it to bits until you have something that looks like this:





The strip you see goes between the two hood halves straight down the middle and will ensure there is no front seam. The seams that this strip creates will be hidden under the grey U shape she has on her hood.

So once I had this fabric pattern, I laid it down on some tissue paper and traced around it to give me my first paper pattern. It took me two goes at a muslin mock up before I was happy with how it looked.

This picture below shows the tissue paper progression of my pattern. I'll make my pattern available once I've worked out how to photoshop it... I'm completely inept with photoshop. If anyone has any tips, let me know in the comments because I'm more than happy to give you all my pattern so we can all embody the bad-assness that is Tali'zorah.


One thing I realised would be VERY important regarding her hood is that it's all very well if it fits your head but don't forget you're going to have a helmet under there! I made it much bigger than my head (which is hard, I have a big head...) so that it could accommodate the helmet whenever I get round to it... I really hope I've made it big enough...

Here is my final muslin mock up!




The next step was to wrap myself in muslin and see if I could wrangle out a pattern for the body pieces of the wrap. I don't have any pictures of this process because I couldn't hold the fabric and the camera at the same time but my measurements were as such:

For the piece that wraps around her body: 18.5cm wide and 100cm long
For the piece that wraps around her thigh: 14.5cm wide and 60cm long

Her sleeve pieces will be tackled at a later date, for now all that's left to do with my pattern pieces is to transform them into something purple!

Fabric Choice:
The fabric I've chosen is a cotton stretch lycra/jersey combo that I bought unsurprisingly from ebay! I thought a bit of stretch would be important given everything is so skin tight but it has proven to be fairly difficult to work with in terms of edges curling up due to the lycra and only being able to cut out one piece at a time due to way it warped in certain areas after I washed it! Also, for a fairly inexperienced sewer like me, I've heard some horror stories of how hard it is to sew correctly and I have to say, preliminary tests with the machine have proven really tough and there have been a lot of unpicking of stitches... But we stay positive and power through, I have a knack for winging things and it still working so I'll do a bit of research, be as prepared as possible and just goddamn get it done!




So I have 2x hood pieces, 1x middle hood piece, 2x body pieces and 2x knee pieces! (Some pieces are under others :P)

So here are the pieces for the main fabric part all cut out...You know what bit comes next? That's right...painting on the swirls.... Lord save me!

Saturday, 26 July 2014

Tali'Zorah Cosplay: Introduction and Game Plan....

Mass Effect is one of my favourite video game series; nothing else has ever had me so involved in every aspect of it: from the story and the characters to the graphics and the soundtrack. And being the big crafty nerd I am, I love to show my appreciate for it through the medium of sewing!

Tali'Zorah captured the heart and minds of many a fan and I've always thought her costume was bad ass and that we shared the same junk in our trunk (she's got some real hips on her!) so I recently decided to recreate her iconic Mass Effect 2 costume!

SASSY
This is going to be pretty complex and a big challenge for me, I'm still not the most experiences seamstress! In fact, I only just bought a sewing machine a couple of months ago (as a congratulations present to myself after I passed my third year veterinary exams!)

More than the sewing is the helmet...I've never really made any props before and I'm not entirely sure how to go about it. I forsee a lot of EVA foam, hot glue, spray paint primer, tears and swear words on the horizon. They always say start your costume by making the hardest part so you know you can definitely complete it but I say, screw them, I'm starting with the bit I like! I'll be making her purple swirly wrap to start with:


Here's how I'm going to break down the fabric part of this costume:




This plan will almost certainly change but at least I have a general idea to begin with, I'm usually a shitty planner and jump in guns blazing with no clue how I'm going to proceed! So at least I tried this time right?! I'd also thought I'd write a bit of a list of things I'm going to need:

1) Body suit

  • I could make it, but sod that, I bought one off Ebay because I'm not a total martyr ---> Bodysuit 
  • Although Tali's under suit is mostly black, it does have a hexagon pattern down her torso and legs which I plan to spray paint on
  • I've made a hexagon pattern on the ol' computer and I plan to use some plastic quilting template sheets (you can get them from any sewing orientated shop like C and H fabrics, John Lewis haberdashery section or Hobby craft, that kind of thing) and using a Stanley/exacto knife to cut out the template.
  • The hexagon pattern and the black part of the catsuit are delineated by a grey trim of some kind so I've bought so thin grey cord (from Ebay!) which I will sew/glue around the suit to keep everything crisp and clean!



2) The Helmet

  • This will be my real challenge! I've been looking around the interwebs to see what other people have made their out of and it's astounding how inventive people are! I've seen it made out of paper, foam, cast in resin and every other material in-between! 
  • I'm neither inventive nor adaptable but I thought I might just be able to manage with foam. I've bought some big sheets of EVA foam matting off Ebay (Again. I literally buy 95% of everything on Ebay) and I plan on somehow forming that into something spectacular!
  • At this stage, not sure how I'm going to make the purple visor but who knows, I may even follow this tutorial I saw for a DIY vacuum forming table! I'll do a bit more research on the options and then pray not to mess it up!

That's about as far as I've got on the planning front! I'm too gung-ho for real planning, I like to get stuck, stay positive and hope nothing fucks up too badly!

My next post will be on drafting the pattern for her hood....




Saturday, 26 April 2014

Some custom painted Mass Effect themed shoes!

Woah... it’s been a while! How university gets in the way of life...

If you follow me on twitter, you may remember a little geeky project I had on the side lines during summer last year after I saw some amazing Mass Effect themed shoes by weemiji. It got me really inspired to make my own. So... behold my custom Mass Effect shoes! I fully designed and painted each of them myself and I have to say, I'm pretty chuffed with how they turned out! They feature characters from across all three games and I'll always lament those I had to leave out...(Thane *sniff*). I'll add some progress pictures and a more detailed explanation of how I did it if you're interested at a later date but for now, you can see a few more images in my imgur album here.



Here's Tali and Legion sharing the stage


The theme for these shoes is "putting your differences aside" - well, it wasn't when I started but I realised I was definitely drawn to unconventional couples being painted together! Here's Mordin and Wrex coming to an understanding.







There's no Shepard without Vakarian! This Shepard is based of my in game character who is very close to my heart!



A work in progress picture of Legion looking a bit bland










Wednesday, 21 March 2012

To Mass Effect 3 players, from Dr. Ray Muzyka, co-founder of BioWare (en Español)

I am both very bored and very scared that my years of dedicated Spanish study will go to waste. So to practise, I translated Dr Muzyka's press release statement on the furore surrounding Mass Effect 3! It's not going to be perfect, I'm a little rusty, but it was just a bit of fun anyway. (Prepare yourself for awkward Spanish...)


Como co-fundador y GM de Bioware, estoy muy orgulloso del equipo de ME3. Yo personalmente creo que ME3 es la obra mejor que hemos creado. Así que es muy doloroso recibir realimentación de nuestras hinchas de verdad, que las terminaciones del juego no fueron lo que les habían esperado. Nuestro instinto primero es defender nuestro trabajo y señalar a los altos tasaciones que los críticos han ofrecido – pero, por respeto a nuestras hinchas, necesitamos aceptar la crítica y realimentación con humildad.

Yo creo pasionalmente que los juegos son una forma de arte, y que el poder de nuestro medio fluye de nuestra audiencia, que están involucrados profundamente en cómo se desarrolla la historia, y que tienen el derecho indiscutible de proporcionar una critica constructiva. Al mismo tiempo, también creo en, y apoyo las decisiones artísticas realizadas por el equipo de desarrollo (?). El equipo y yo hemos estado pensando mucho en la mejor forma de abordar los comentos de los jugadores sobre la terminación de ME3, mientras se mantiene la integridad artística del juego.

Mass Effect 3 concluye una trilogía con tanto control y propiedad de la historia en cuanto a las jugadores, que fue muy difícil para nosotros a predecir el alcance de emociones que sientan los jugadores cuando terminen. El viaje que emprendas en ME3 provoca una gama intensa de emociones muy personales en el jugador. Aun así, la reacción apasionante de algunos de nuestros jugadores leales a las terminaciones actuales en ME3, es algo que realmente nos ha sorprendido. Esto es un asunto que nos importa profundamente, y vamos a responder de una manera justa y oportuna. Ya estamos trabajando duro para hacer eso.

Con ese motivo, desde que el juego lanzó, el equipo ha estado enfrascando en todo que pueden encontrar sobre los reacciones del juego – la prensa de industria, los foros, Facebook y twitter, para nombrar sólo unos pocos. El equipo de Mass Effect, al igual que otros equipos a través de la etiqueta de Bioware dentro de EA, está formado por gente apasionada que trabaja duro por el amor de la creación de experiencias que excitan y deleite nuestras hinchas. Estoy honorado a trabajar con ellos porque tienen el coraje y fuerza a responder a la realimentación constructiva.

Construyendo en sus investigaciones, productor ejecutivo Casey Hudson y el equipo están trabajando duro en una serie de iniciativas de contenido del juego que ayudará a responder a las preguntas, proporcionar mas claridad por aquellos que están buscando el cierre adicional para su viaje. Vas a oír más sobre eso en abril. Estamos trabajando duro para mantener el equilibro correcto entre la integridad artística y la historia original, mientras que abordando la realimentación de las hinchas que hemos recibido. Esto es además de nuestros planes existentes para continuar ofreciendo contenido nuevo  para Mass Effect y nuevos juegos completos, así que ten por seguro que su viaje en el universo de Mass Effect puede, y podrá, continuar.

La reacción del estreno de ME3 ha sido sin precedentes.  Por un lado, algunos de nuestras hinchas fieles están expresando con pasión su descontento sobre la manera en que el juego concluye; nos preocupamos por estos comentarios; y estamos planeando a abordarle directamente. Sin embargo, la mayoría de la gente parece estar de acuerdo de que el juego como un todo es excepcional, con más de 75 críticos le dando una calificación perfecta y un promedio de calificación en los 90s. Así que en general, estoy orgulloso del equipo, pero podemos y siempre debemos tratar de hacerlo mejor.

Algunas de las críticas que han sido entregados en el calor de la pasión por nuestros hinchas mas ardientes, a pesar de hecho que esta basado en principales validas, tal como la búsqueda de una mayor claridad a las preguntas o buscando mas el cierre, por ejemplo – desafortunadamente se ha convertido en destructiva, no constructiva. Escuchamos y responderemos a la crítica constructiva, pero por más que no vamos a tolerar ataques individuales contra miembros de nuestro equipo, no vamos a apoyar o responder a los comentarios destructivos.

Si estas una hincha de Mass Effect y tienes la entrada para el equipo – respetamos tu opinión y queremos oírlo. Estamos comprometidos hacer frente a tu retroalimentación constructiva, lo mejor que podamos.  En cambio, pediría que nos ayudan a hacer eso por apoyando lo que realmente creo que es el mejor juego que ha creado BioWare. Le insto a que hagas tu propia investigación; jugar el juego, completarle y dinos lo que piensas. Dile a tus amigos si sientes que es un juego bueno en total. Confiar que estamos intentando nuestro más duro, como siempre, para abordar tu realimentación. Como artistas, nos preocupamos por nuestras hinchas profundamente y apreciamos su apoyo.

Gracias para tu retroalimentación – estamos escuchando.

Ray